靜電消除設備

靜電消除噴排

★特性及功能 高密度離子放電間距 (25MM) 離子均勻分佈,尺寸可依客戶需求訂做,高壓離子產生氣提供 5KV 工作電壓。
☆1.5米長高壓隔離線。 ☆1.5米長AIR管路。
☆高壓吹氣 (BLOW,FORCE) 除塵效果強。
☆靜電中合效果優於 ANSI/ESD S20.20等標準。
☆提供 110V/60HZ 及 220V/50HZ 單向三線式安全接地型插頭電源線。
☆適合 TFT/LED、PCBA 大尺寸板件之 Particle 靜電消除使用。

靜電噴台
★特性及功能 鵝頸管固定噴頭可任意調整吹氣方向,腳踏方式控制吹氣作業方便,可快速有效消除靜電吹除塵絮。
☆高壓離子產生器提供5KV工作電壓。
☆60公分鵝頸管前置高壓離子空氣噴頭。
☆腳踏式空氣開關2.5米長AIR進氣管路。
☆高壓吹氣 (BLOW,FORCE) 除塵效果強。
☆靜電中合效果優於ANSI/ESDS20.20等標準。
☆提供110V/60HZ及220V/50HZ單向三線式安全接地型插頭電源線。
☆適合於需手持工件進行靜電消除及除塵之工作站。
靜電槍
★特性及功能 手持式靜電噴槍隨意由點、線、面掃射消除工件表面靜電,清除塵絮。
☆高壓離子產生氣提供 5KV 工作電壓。 輕便手持型人體工學設計噴槍。
☆3米長高壓隔離線。 ☆3米長 AIR 管路。
☆高壓吹氣 (BLOW,FORCE) 除塵效果強。
☆靜電中合效果優於 ANSI/ESD S20.20 等標準。
☆提供 110V/60HZ 及 220V/50HZ 單向三線式安全接地型插頭電源線。
☆適合 TFT/LED、PCBA、照相機及電腦等組裝工作站使用。
表面電阻計
(德製)

Meter Surface Resistance

Specifications:
Resistance meter: Test voltage: 100 Volt
Test range: 103 - 1012 Ohm
Accuracy: +/- 1/2Dekade
Wrist-strap-tester: Test voltage: 15 Volt
Test range: 0,75 - 35 MOhm
Accuracy: +/- 10%

Dimensions: 130 x 65 x 27 mm
Power supply: Batterie, 9 Volt Weight: 180 g

Delivery: meter, case (leather), test leads Order-no: C-199 753
The new “Safe-STAT” Combi meter from BJZ is the only available pocket meter which measures surface resistance and resistance to ground quickly and easily according to IEC 61340 using a test voltage of 100 Volt. The meter is equipped with two parallel probes on the rear side which enable the simple measuring of surface resistance by laying the meter on the surface to measure. Two connections on the side of the meter enable the use of external probes. The integrated wrist-strap-tester (test voltage 15 Volt) makes the “Safe-STAT” meter best suited for a quick and easy check of ESD-performance of the working place, personnel grounding etc.
✪另有多項靜電消除設備及靜電消除液可供選擇 *如有需要其他產品需求請電洽,有專人為您服務。